kessetsuOpen editor
← All calculators

Non-inverting op-amp

Size feedback resistors for a target voltage gain with KESSETSU_OPAMP_V2. Check rail headroom, bandwidth estimate and open for OP/AC simulation.

Design inputs

From calculation to circuit

Enter your inputs and calculate to see selected components, achieved results and editable circuit source.

How this calculation works

R2 = R1 × (gain − 1) · Av = 1 + R2 / R1

Uses built-in KESSETSU_OPAMP_V2 (A_OL = 200k, GBW = 1 MHz, Rout = 50 Ω, 1 V rail drop) with symmetric ±Vsupply rails.

Use the same tool locally

Use Kessetsu CLI 1.6.0 or newer. Add --format json for an AI agent. Install or update the CLI.

kess tool non-inverting-opamp --gain "10" --r1 "10k" --vin "0.5V" --supply "15V" --values e24 --output non-inverting-opamp.kess